Shop

The XBee SIP Adapter is a fully-assembled, small-footprint solution for interfacing the most commonly-used XBee module features with your 3.3 V or 5 V microcontroller.

The 2 x 5 dual SIP header makes a sturdy connection to your breadboard or through-hole board, and brings the basic connections to your prototyping area without taking up a lot of space. The more advanced XBee features are still accessible, through additional headers on the module.

Features:

• Onboard 3.3 V regulator
• 5V to 3.3 V logic translator buffers common I/O pins
• Six status indicator LEDs for Power, Tx, Rx, RSSI, Associate and mode (Sleep/ON)
• Small footprint dual SIP header provides support and allows easy interfacing to DOUT (TX), DIN (RX), RTS, 5 V supply and ground
• 5-pin female header connections provides interfacing to other XBee pins such as sleep, reset and associate
• A row of 10 plated through-holes with 0.1 spacing allows the option of soldering jumper wires or a header (not included) for access to the remaining XBee pins in advanced applications
• An additional plated through-hole gives access to 3.3 V output for ADC reference (VREF) when required
• Adapter board is pre-assembled no soldering required for using most common XBee features
• Compatible with all Parallax microcontrollers, including the 5 V BASIC Stamp modules and 3.3 V Propeller P8X32A

Note: This SIP Adapter is compatible with XBee and XBee Pro modules.

XBee SIP Adapter Details:

• Power requirements: 5 VDC
• Communication: Serial pass-through to XBee module
• Dimensions: 1 x 2.4 x 0.36 in (25.4 x 61 x 9.14 mm)
• Operating temp range: -40 to + 158 F (-40 to +70 C)
• PCB assembled, tested, and completed in Rocklin, California

Downloads